HCIC · Transportation HydraulicsWhatsApp / Tel  +86 153 7619 8599  ·  davidsong@mail.huachen.cc

High Load Double Acting Knuckle Boom Crane Hydraulic Cylinder 280mm Bore 180mm Rod Steel Hallite Seals 32MPa CE ISO9001

Knuckle Boom Crane Hydraulic Cylinder 280mm Bore 180mm Rod 737mm Stroke

Overview

Knuckle Boom Crane Hydraulic Cylinder 280mm Bore 180mm Rod 737mm Stroke

This cylinder drives the lifting arm of a knuckle boom crane and is built for high load work where downtime is expensive Its 280mm bore and 737mm stroke turn hydraulic pressure into the force needed to raise and position heavy loads at reach

The barrel has a 320mm outer diameter and runs a precision honed bore to keep friction low and seal life long The piston rod is hard chrome plated for wear and corrosion resistance on site with dust and weather The rod end and base end both use mounting eyes with bronze bushings that take the load directly and reduce pin wear Hallite and NOK seals hold pressure through repeated lifting cycles

Each unit is designed for a 32MPa working pressure and tested at 38MPa before shipment so the cylinder can handle pressure spikes in normal crane work The exterior is finished in matte black for a clean machine look

CE and ISO9001 certified OEM and ODM orders are welcome Fast customization is available for bore sizes strokes mounting types and port positions

Key features

  • Built to OEM drawings or reverse-engineered from a sample
  • Hard-chrome plated, heat-treated rods
  • High duty-cycle seal packages
  • Clevis, cross-tube, trunnion or custom mounts
  • Pressure-tested at 3000 PSI before dispatch
  • 18-month warranty from shipment

Specifications

Typical values — final specifications are matched to your drawings or sample.

Bore280mm
Rod180mm
Stroke737mm
Max operating pressure32MPa
MaterialSteel
MOQ1 pc — sample orders welcome
Lead time45–60 days samples; 30–45 days for 50+ pcs

Frequently asked questions

What specifications do you need for a quote?

Bore, rod, stroke, working pressure, mounting type and port threads, or a drawing/sample. We quote within 48 hours; MOQ is one sample.

Are your cylinders tested?

Yes. Each cylinder is pressure-tested at 3000 PSI and 100% inspected before dispatch, with an 18-month warranty and full maintenance kits available.

Can you build to OEM drawings or reverse-engineer?

Yes. We build to your drawings or reverse-engineer from a sample, with clevis, cross-tube, trunnion and custom mounts to match your machine.

Ready to start your hydraulic project?

Send us your drawings — get a detailed quote within 48 hours.