Forklift tilt cylinder, 100 mm bore, 45 mm rod, 90 mm stroke and 583 mm installation distance, with spherical bearing and clevis mount.
Forklift tilt cylinder, 100 mm bore, 45 mm rod, 90 mm stroke and 583 mm installation distance, with spherical bearing and clevis mount.
This cylinder is built for the forklift mast tilt system Two units are used per truck one on each side and the stroke difference between the left and right cylinder is held within half a millimeter so the mast tilts evenly under load
The rod end runs on a spherical bearing that absorbs angular movement while the base end uses a heavy duty clevis fork for secure pin mounting Two M16 ports connect straight to the mast hydraulic lines
The barrel is made from precision steel tube with the bore honed to a mirror smooth finish and the piston rod is hard chrome plated for wear and corrosion resistance in dusty or humid yards Hallite and NOK seals keep the system leak free through repeated tilt cycles The piston moves smoothly across the full stroke with no binding
Every unit is tested at 17MPa rated pressure and 26MPa test pressure Internal leakage is kept to a minimum at rated pressure and a proof pressure of 28MPa is held for 2 minutes without leakage Starting pressure stays low for smooth response
CE and ISO9001 certified OEM and ODM orders are welcome Custom bore sizes strokes port positions and paint colors available
Typical values — final specifications are matched to your drawings or sample.
| Bore | 100mm |
|---|---|
| Rod | 45mm |
| Stroke | 134mm |
| Max operating pressure | 17.5MPa |
| Material | Steel |
| MOQ | 1 pc — sample orders welcome |
| Lead time | 45–60 days samples; 30–45 days for 50+ pcs |
Bore, rod, stroke, working pressure, mounting type and port threads, or a drawing/sample. We quote within 48 hours; MOQ is one sample.
Yes. Each cylinder is pressure-tested at 3000 PSI and 100% inspected before dispatch, with an 18-month warranty and full maintenance kits available.
Yes. We build to your drawings or reverse-engineer from a sample, with clevis, cross-tube, trunnion and custom mounts to match your machine.
Send us your drawings — get a detailed quote within 48 hours.